101User

Technical => Trouble shooting => Topic started by: Leoleo on 10 Nov, 2017, 02:42:11 AM

Title: 101 hero is calibrated but having problems
Post by: Leoleo on 10 Nov, 2017, 02:42:11 AM
As seen in pics below screws are all the way in and I did paper test all should be good but I'm having this problem second pic is from first print when I calibrated it's doing the infill at the wrong spot why is that? And on first pic after a couple of test print it's behaving like its not calibrated I eye checked it and therers not drag and screws are all the way in and I don't want to screw in more because I'm afraid of breaking it this is my first printer   also I'm using simplify3d
Title: Re: 101 hero is calibrated but having problems
Post by: BobC on 22 Nov, 2017, 07:24:08 AM
Your base is installed upside-down!  The smooth side goes up.