Skip to main content
July 21, 2018 ...

News

  • .stl, .gcode and .123dx files can now be uploaded as attatchments

Topic: Nothing prints test star or anything (Read 215 times) previous topic - next topic

  • Rixy
  • [*][*]
Nothing prints test star or anything
Here's an example of the octopus bowl from 101land.
I've calibrated the screws many times and also made sure the wheel inside the extruder is going around.
Any ideas?


Re: Nothing prints test star or anything
Reply #1
its moving right. looks like the nozzle is dragging on the glass, which is preventing any plastic actually coming out.
calibrate the screws so that when the hotend is at the lowest point its just barely starts to grab a sheet of regular printer paper.

  • Rixy
  • [*][*]
Re: Nothing prints test star or anything
Reply #2
Thanks I'll try to calibrate it again not had much so far.
BTW i like your upgrade videos you've done.