Skip to main content
July 17, 2018 ...

News

  • Hope you enjoy the new look of the forum.

Topic: Can't print from SD Card (Read 784 times) previous topic - next topic

  • 3DVol
  • [*][*]
Can't print from SD Card
I cannot seem to print from the SD card.  I have downloaded the test file from www.101hero.com and renamed it from "Test File of 101HERO Pylon 3D Printer.7z" to "101Hero".

I have connected to the printer through Repetier and i get the following when i insert the sd card and press the reset button

22:33:18.393 : Printer reset detected - initalizing
22:33:18.393 : start
22:33:18.393 : echo: External Reset
22:33:18.393 : Marlin 1.0.0
22:33:18.393 : echo: Last Updated: Jan 12 2017 16:20:13 | Author: (101 HERO)
22:33:18.393 : Compiled: Jan 12 2017
22:33:18.400 : echo: Free Memory: 12240  PlannerBufferBytes: 1232
22:33:18.400 : echo:Hardcoded Default Settings Loaded
22:33:19.166 : echo:SD card ok
22:33:19.169 : echo:enqueing "M23 101hero"
22:33:19.169 : echo:enqueing "M24"
22:33:19.209 : File opened: 101hero Size: 1417
22:33:19.209 : File selected
22:33:19.213 : FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1
22:33:19.244 : X:0.00Y:0.00Z:0.00E:0.00 Count X: 0.00Y:0.00Z:0.00
22:33:19.245 : echo:Active Extruder: 0
22:33:19.245 : Begin file list
22:33:19.248 : End file list
22:33:19.248 : Begin file list
22:33:19.248 : End file list
22:33:19.249 : echo:Unknown command: "7z??'"
22:33:19.249 : echo:Unknown command: "/?`????"
22:33:19.257 : echo:Unknown command: "_?h??????N??%?_?]bX?c??)????????_?????-Y?d??y?ZHbNQ ??m">Y?x?BU?c?H???????????????Y   ao<??"
22:33:19.259 : echo:Unknown command: "]"
22:33:19.269 : echo:Active Extruder: 0
22:33:19.283 : echo:Active Extruder: 0
22:34:12.128 : Communication timeout - reset send buffer block

Any advice?

I have a bad motor, so I am waiting on it to arrive, but i was hoping that i would get some sort of movement out of the printer, or that the print head would warm up.  I am able to control the printer manually through Repetier, including heating the print head and extruding.

  • 3DVol
  • [*][*]
Re: Can't print from SD Card
Reply #1
Didn't realize .7z was a compressed format.  Downloaded an program to unzip the file.