Skip to main content
July 17, 2018 ...

News

  • .stl, .gcode and .123dx files can now be uploaded as attatchments

Topic: My 101Hero addived today and had it built in about 20 minutes (Read 409 times) previous topic - next topic

  • Namrood
  • [*][*]
My 101Hero addived today and had it built in about 20 minutes
Hi Guys and Gals..

My 1010Hero arrived today and had it built in about 20 minutes. 

I downloaded one of the files from 101land and renamed it as you do.  Popped it in the printer and waited, and it kicked into life.

It went through its checks, filament extruded, as quick as a flash it whipped it off and it lowered itself to the print bed.

It then proceeded to rip the tape off the glass and print nothing.  I am trying to adjust the 3 screws to get the right hight, but does anyone know if there is a default screw setting? As it seems the screws have been screwed right down

Here is a pic of the 101 next to my Kossel Mini which got damaged in transit..
  • Last Edit: 11 May, 2017, 19:57:37 PM by Namrood

  • al3x.nu
  • [*][*]
Re: My 101Hero addived today and had it built in about 20 minutes
Reply #1
I would first of all skip the tape, I hade the same problem end then went on to use a gluestick. Then it worked fine.

Then you always can use these. http://101user.com/index.php/topic,140.0.html

And read these http://101user.com/index.php/topic,5.0.html

Hope that it works better for U.